Products for Industry

Spray Dryer Pulvis Mini Spray GB210-A

Item Code : 212777
Model : GB210-A

Spray Dryer Pulvis Mini Spray (GB210-A)

Spray Dryer Pulvis Mini SprayGB210-A

Product Summary

Features of Spray Dryer Pulvis Mini Spray (GB210-A)

Features: Compact spray dryer that can produce
powder easily on a laboratory scale. It is
capable of variety of applications from
preliminary experiments in a pilot plant to
drying work in general laboratories.
Features: Samples unstable at high temperatures can be
reliably processed into fine powder. The heat is
applied instantly and indirectly to the powder itself
Features: Prepared fine powder will not be oxidized, contains
minimal moisture and is contaminant-free
Features: Direct drying from solution/suspension liquid to
fine powder with a reduced risk of contamination.
No pre or post processes such as filtration, separation,
or pulverization are required
Features: Processing of samples containing organic
solvents is made possible by connecting the
Solvent Recovery Unit GAS410
Features: This unit can also be used as a fluid bed drying
granulator by installing a separate mini bed
attachment GF200 instead of GF300 spray drying
attachment
Features: An automatic lift is equipped as standard to
enable easy installation or removal of glass drying
chamber attachment
Features: A service outlet (max. 2A) and a sample stand are
equipped as standard for connecting a magnetic
mixer for stirring suspended liquid sample
Features: Stable spray drying using a unique peristaltic pump,
nozzle cooling mechanism, pulse jet mechanism
and a nozzle knocker enable stable spray drying
Control Panel: Inlet temperature, outlet
temperature, and drying
air amount are digitally
displayed. Setting is made
on the touch panel that
allows operation settings,
operation status display
as well as error display, and settings of various
operation conditions.

Specifications

Item Code	212777
Model	GB210-A
Temp. adjusting range	40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature)
Temperature adjusting accuracy	Inlet temperature±1°C
Spraying system	Two-way nozzle, Nozzle No. 1A as standard
Drying air amount adjusting range	0 to 0.7m3/min
Spray air pressure adjusting range	0 to 0.3MPa
Liquid sending pump flow rate range	0 to 26mL/min
External output	Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Automatic lift	Moving up/down of glass chamber automatic lift
Temperature adjusting device	PID digital temperature adjusting device
Touch panel	Blower, Heater, Liquid sending pump, Pulse jet switch, Error display
Control select switch	Inlet temperature, Output temperature control switch (Outlet temp. control is conditional)
Heater	2.0 kW (at 200V) to 2.88 kW (at 240V)
Liquid sending pump	Fixed amount peristaltic pump
Spraying air pump	Spraying air compressor (Sold separately) is used.
Service outlet	For stirrer: AC100V, Max. 2A
Suction blower	Bypass blower, Brushless DC motor
Filter	Suction filter, Exhaust filter
Recovery of solvent	Solvent recovery unit GAS410 (sold separately) is used.
Spray nozzle cooling mechanism	Connector: Nipple×2, O.D.:ø10.5 mm
Spray air connection diameter	Nipple diameter:ø7 mm
Exhaust connecting diameter	ø50mm
Safety device	Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
Accessories	Silicon tube (with a stopper)×3, Tiron tube (with a stopper)×2 Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, Teflon braided hose 5m (with two hose bands), Container table
External dimensions（W×D×H mm）	760×420×1350mm
Power Source	AC220V 17A
Weight	110kg