Products for Industry

Spray Dryer Pulvis Mini Bed GB210-B

Item Code : 212778
Model : GB210-B

Spray Dryer Pulvis Mini Bed (GB210-B)

Spray Dryer Pulvis Mini BedGB210-B

Product Summary

Spray dryer capable of granulating and drying wet powder.

Features of Spray Dryer Pulvis Mini Bed (GB210-B)

Features: Designed to granulate powder and
dry wet powder using a fluid bed. This
is a fluid bed drying granulator used
in combination with the basic unit
GB210 and Mini-bed attachment
GF200.
Features: The chamber is made of ultra hard glass
and the user can observe status of the
fluid bed or spraying status. Also, the
flowage meter, the spraying pressure
meter, t h e chamber i n l e t / o u t l e t
temperature indicator are useful for
evaluation of data
Features: The unit can also be used as a spraying
dryer by installing the mini spray
attachment GF300 (optional)
Features: The unit has an automatic lift as a
standard to enable convenient installation
or removal of the glass chamber
attachment
Control Panel: Inlet temperature, outlet
temperature, and
drying air amount are
digitally displayed.
Setting is made on
the touch panel that
allows operation settings, operation status
display as well as error display, and settings
of various operation conditions.

Specifications

Item Code	212778
Model	GB210-B
Temp. adjusting range	40 to 220°C (inlet temperature), 0 to °60(Outlet temperature)
Temperature adjusting accuracy	Inlet temperature ± 1°C
Spraying system	Two-way nozzle, Nozzle No. 1A as standard
Drying air amount adjusting range	0 to 0.7m3/min
Spray air pressure adjusting range	0 to 0.3MPa
Liquid sending pump flow rate range	0 to 26mL/min
External output	Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Automatic lift	Moving up/down of glass chamber automatic lift
Temperature adjusting device	PID digital temperature adjusting device
Touch panel	Blower, Heater, Liquid sending pump, Pulse jet switch, Error display
Control select switch	Inlet temperature, Output temperature control switch (Outlet temp. control is conditional)
Temperature sensor	K-thermocouple
Heater	2.0kW (at200V) to 2.88kW (at240V)
Liquid sending pump	Fixed amount peristaltic pump
Spraying air pump	Spraying air compressor (Sold separately) is used
Service outlet	For stirrer: AC100V, Max. 2A
Suction blower	Bypass blower, Brushless DC motor
Filter	Suction filter, Exhaust filter
Spray nozzle cooling mechanism	Connector: nipple×2, O.D.: ø10.5mm
Spray air connection diameter	Nipple diameter: ø7mm
Exhaust connecting diameter	ø50mm
Safety device	Inlet/Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
Accessories	Silicon tube (with a stopper)×3, Tiron tube (with a stopper)×2, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, Teflon braided hose 5m (with two hose bands), Container table
External dimensions（W×D×H mm）	760×420×1350mm
Power Source	AC220V 17A Single phase
Weight	110kg