Products for Industry
Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) DKG811V
Item Code : 212899
Model : DKG811V
Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) (DKG811V)
Product Summary
Fast rise & fall temperature time, which helps improve productivity.
Features of Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) (DKG811V)
- Features
- The temperature rise time and fall time have been shortened to 25 → 260 ° C for 45 minutes and fall: 260 → 50 ° C for 50 minutes (DKG811 / 811V).
- Features
- By operating the manual damper on the front of the main unit and by adopting an all-exhaust system in which air supply and exhaust are linked, it ables to achieves a significant reduction in temperature drop time
- Features
- Since it is a horizontal airflow method suitable for processing samples in magazine racks and large amounts of samples, highly accurate temperature performance can be obtained even under load.
- Features
- DKG611V / 811V are low/less silicon specification.
- Features
- The power supply will be multi-voltage supply of 200 to 220V. (DKG611 / 611V / 811 / 811V)
Specifications
Specifications
Item Code | 212899 |
---|---|
Model | DKG811V |
Method | Forced convection |
Operating temperature range | Room temp. +30°C to 260°C |
Temperature adjustment accuracy | ±0.5℃ |
Temperature distribution accuracy | ±2℃(at 200℃)、±2.5℃(at 260℃) |
Time to attain max. temp. | Within 50min. from 25°C ->260°C |
Temp. decrease time | About 50min. from 260°C ->50°C |
Air supply/exhaust damper | Main body front operation / manual damper Air supply pipe / exhaust pipe back NSSC180 with exhaust duct |
Interior/exterior | Stainless steel plate/Electrogalvanized steel sheet baking paint |
Heater and heat insulator | SUS pipe heater |
Heater capacity | 200 to 220V 3.6 to 4.36kW |
Blower fan | 2 sirocco fans |
Fan motor | Condenser type motor |
Cable port | I.D.: 30mm at the right side of the main body x 1 |
Door packing | Fluororubber |
Air supply port | Heater chamber bottom (opening and closing with manual damper) |
Damper control | Air supply / exhaust interlocking with the manual operation knob on the front of the main unit |
Exhaust port | Upper part of rear of the main body: φ80 (Open / Close with a manual damper) |
Heater control | SSR control |
Sensor | K thermocouple (for temperature control / independent overheating protector) |
Safety unit | Operation Features : Fixed value operation, program operation, quick auto stop, auto stop, auto start, program auto start |
Safety unit | Program mode : 6 patterns (program 1:30 step, program 2-3: 15 step, program 4-6: 10 step) step weight function, repeat function, step hold function, step skip function |
Internal dimensions(W×D×H mm) | 600×500×1000mm |
External dimensions(W×D×H mm) | 770×696×1674mm |
Withstand load of shelf | 15 kg / pc. |
Shelf support step number | 15 steps |
Shelf support pitch | 60mm |
Accessories Shelf | 4 pcs. |
Accessories Shelf support | 8 pcs. |
Power Source |
Single Phase AC200 to AC220V
18.5-20.5A
Breaker capacity and power supply equipment capacity 30A. Power plug is not included. The length of the power cord is about 2m. |
Weight | 155kg |
Remarks(dimensions) | 300L |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.