Products for Industry

Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) DKG810

Item Code : 212888
Model : DKG810

DKG610、DKG810

Comparison of temperature increase time with conventional products

Comparison of temperature decrease time with conventional products

Dimensions

Method

Cable Hole

Interior

Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) (DKG810)

Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket)DKG810

Product Summary

Reduced heating time to 1/2.5, cooling time to 1/4 (compared with conventional company products), horizontal air flow appropriate for loaded operation, the standard oven for production lines supporting multi power supplies. The product lineup includes a silicon free type.

Features of Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) (DKG810)

Features: Standard oven with simple operation whose temperature increase and decrease time has been improved 50% or more compared with conventional products to reduce product takt time.
Features: Temperature increase time has been reduced up to 1/2.5 (at no load, compared with conventional company products), temperature decrease time has also been reduced to 1/4 (at no load, compared with conventional company products). Extensive increase in work efficiency is expected.
Features: Employment of a total exhaust system in which air supply and discharge are linked by operation of the manual damper at the front realizes extensive reduction in temperature decrease time.
Features: The horizontal air flow system ideal for processing samples in a magazine rack or a lot of samples realizes high precision temperature performance even at loaded condition.
Features: Fluoro rubber is employed for shoulder packing to realize silicon free. (DKG610V/650V/810V/850V)
Features: Product lineup includes 610/610V/810/810V for 200 to 220V power supply and 650/650V/850/850V for 230 to 300L 240V to support multiple power supplies.

Specifications

Item Code	212888
Model	DKG810
Method	Forced convection
Operating temperature range	Room temp. +30°C to 260°C
Temperature adjustment accuracy	±0.5℃
Temperature distribution accuracy	±2℃（at 200℃）、±2.5℃（at 260℃）
Time to attain max. temp.	Within 50min. from 25°C ->260°C
Temp. decrease time	About 40min. from 260°C ->50°C
Air supply/exhaust damper	Front operation/manual damper Air supply pipe/exhaust pipe at the rear NSSC180 With exhaust duct
Interior/exterior	Stainless steel plate/chrome free electro galvanized steel plate Chemical proof baking finish
Heater and heat insulator	SUS pipe heater & glass wool
Heater capacity	200 to 220V 3.6 to 4.36kW
Blower fan	Sirocco fan×2
Fan motor	Condenser type motor × 2pcs
Cable port	I.D.: 30mm One at the right side of the main body
Door packing	Silicon rubber
Air supply port	Bottom of heater room (Open/Close with a manual damper)
Damper control	Linked air supply / Exhaust with manual knob on the front of the main body
Exhaust port	Upper part of rear of the main body: φ80 (Open / Close with a manual damper)
Heater control	SSR control
Sensor	K-thermocouple (for temp. adjustment, Indivisual overheating prevesion)
Safety unit	Self diagnostic function (Temperature sensor error, Heater disconnection, SSR short-circuit, Automatic overheat prevention function), Key lock,
Safety unit	Program lock, Overheat preventive device, Over current electric leakage breaker, Door switch, Temperature fuse, External alarm terminal
Internal dimensions（W×D×H mm）	600×500×1000mm
External dimensions（W×D×H mm）	770×696×1674mm
Withstand load of shelf	15 kg / pc.
Shelf support step number	15 steps
Shelf support pitch	60mm
Accessories Shelf	4 pcs.
Accessories Shelf support	8 pcs.
Power Source	AC200 to 220V 18.5-20.5A Single-phase
Weight	155kg
Remarks(dimensions)	300L