What’s New
2013-12-19 Maintenance Tip 3: Routine Maintenance for your Yamato Water Purifier (WG Series)
To promote longevity of your WG series Water Purifier, we recommend that you carry out regular checks and a few simple steps to maintain its performance.
The following items are recommended to be added to your maintenance routine for the product:
Maintenance/check items | Reference for timing | Remarks |
---|---|---|
Replacement of pre-treatment cartridge | Apprix. 6 months Exchange message appears on the indication area |
Throughput: About 5000 liters of city water in Tokyo. If the quality of raw water is not good, perform this maintenance as soon as possible. |
Replacement of membrane filter | Apprix. 3 months Exchange message appears on the indication area. |
Throughput: apprix. 500 liters for pure water. Need to exchange if the amount of collection is less than the above value. |
Replacement of ion exchange resin cartridge | Exchange message appears on the indication area. (Displayed when the conductivity of pure water is more than 1 x 10-4 S/m.) |
Throughput: About 700 liters of the raw water of 200 x 10-4 S/m. (1400 liter for WG1000 type) |
Cleaning of distiller | 3 months | If the quality of raw water is not good, start the operation as soon as possible. |
Cleaning of water supply hose filer | 6 months | |
Replacement of hose | 2 years | Connections shall be checked monthly. |
Drainage of distilled water tank | 3 months | IF not used for a long time, drain water from the tank. |
- For more information, please contact:
-
International Sales Department
Tel: 81-3-5548-7122 / Inquiry Form