Products for Industry

Low Temperature Incubator (Programmable)IN604W

Item Code : 211290
Model : IN604W


Temperature Drop Curve

Air current

Low Temperature Incubator (Programmable) (IN604W)

Low Temperature Incubator (Programmable)IN604W

Product Summary

Best selling incubator for low temperature tests and environmental tests

Features of Low Temperature Incubator (Programmable) (IN604W)

Standard low temperature incubator
Available for wide variety of applications from various constant temperature tests to environmental tests
Forced circulation with a fan enables high accuracy temperature control and even temperature distribution
Employment of a large dual-glass door which, with the inner door, forms a triplex glass to improve temperature heat retention(IN604W)
A convenient slide shaker table (optional) is available to make taking out/putting in samples easier (IN604W)
Room light to make inside the unit easily visible as standard(10W fluorescent lamp, IN604W)
The glass inner door keeps temperature changes during observation samples minimum
Employs coolant R404A that complies with Freon regulations



Item Code 211290
Model IN604W
System Forced air convection
Operating Temperature Range -10~50℃
Temperature Adjustment Accuracy ±0.3℃(when refrigerator in continuous operation), ±1.0℃(when refrigerator cycle operation)
Temperature Distribution Accuracy ±1.0℃(at 37℃)
Max. Temperature Reaching Time 20~50℃ approx. 20min.
Lowest Temperature Reaching Time 20~-10℃ approx. 55min.
Interior Stainless Steel
Exterior Chrome-free electronic galvanized plated steel plate chemical-proof baking finish
Heat Insulation Material Stylene foam (non-freon)
Refrigerator Air-cooled fully closed compressor 250W
Refrigerator Medium R404a
Defrosting Mechanism Manual ON / Auto OFF, Timer operation, Cycle operation
Blower Axial fan
Heater Iron-chrome wire heater 550W
Sensor Double sensor:Pt. resistance temperature detector, Pt100Ω(Temperature controller), K-thermocouple(Overheat prevention device)
Cable Port 50mm ID (Right side from the front)
Temperature Control PID
Temperature Setting Digital setting with▲▼ key
Temperature Display Measured temperature: 4-digit orange LED digital display+ VFD fluorescent display
Timer/Timer Resolution 0~999 hrs. 59min. / 1min.
Operation Function Fixed operation, Program operation, Auto stop, Auto start
Additional Function Timer function(accumulated time to 49,999 hrs.), Calibration off-set function, Clock display
Safety Device Self-diagnostic functions(Temperature sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention), Key-lock, Over current ELB, Overheat preventive device
Shelf Loading Capacity 15kg/shelf
Shelf support step number 13 steps
Shelf support pitch 30mm
Shelf / Support Stainless punching metal 3 shelves / 6 supports
Room Light / Service Outlet Fluorescent lamp: 10W/5A with a ground terminal
Program Mode Up to 32 steps, Repeat, Gradient operation
Door Key 2 pcs.
Window Observation window(W516 x H416mm), with key (2pcs.)
Internal dimensions(W×D×H mm) 600×477×500mm
External dimensions(W×D×H mm) 710×645×913mm
Remarks(dimensions) 143L
Power Source AC220VV 5A
Weight 89kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Optional items

Stand (ON61)
Stacking support (OD60)
Stainless steel punching metal shelf (1 shelf with 2 supports) (IN81800)
Stainless steel wire shelf (OIL22)
Shaker setting stage with slide rail (for IN600 series) (OIN88)
External communication function (RS422A) (for IN series)
External communication adapter (RS232C) (OIN70)
Temperature output terminal (for IN series)
External alarm terminal (for IN series)
Time-up output terminal (for IN series)
Drain water tray (OIL26)

Same series products

Low Temperature Incubator (Programmable) (IN604)
Low Temperature Incubator (Programmable) (IN804)