Products for Industry

Solvent Recovery UnitGAS410

Item Code : 212774
Model : GAS410

Solvent Recovery Unit (GAS410)

Product Summary

Highly safe N2 gas sealed circulation system, which can be operated with a spray dryer unit

Features of Solvent Recovery Unit (GAS410)

Features
The Inert N2 Gas Sealed System is used to prevent external discharge when combined with a spray dryer (ADL311SA or GB-210A) when using an organic solvent.
Features
Dehumidifier (Freezer) integrated in GAS410. No extra Freezer/ dehumidi-fier equipment needed
Features
Compressor included, no need for a separate compressor to operate the spray dryer ADL311SA when using organic solvent samples
Features
Flammable or toxic solvents can be processed by combining a N2 gas sealed circulation system and a solvent recovery system (with freezer and capacitor)
Features
Explosion safety with closed loop N2 inert gas system
Features
Recovery of solvent to protect the environment and enable minimized pollution.
Features
Drying of easily oxidized materials is possible
Features
Supports low temperature drying of materials that easily deform with heat
Features
No freezing risk due to organic solvent with aqueous solution mixtures which could cause damage to the closed loop GAS410 system
Features
Spray drying and recovery of products and solvents are performed with meticulously devised safety measures

Specifications

Specifications

Item Code 212774
Model GAS410
Solvent recovery system Capacitor + freezer
Circulating gas N2 gas (sealed circulation when connected to ADL311SA or GB-210A)
Circulating volume flow 0.12 to 0.65m3/min
Compressor (for spraying) Linear compressor integrated
Circulation blower Roots blower
Solvent recovery container 2L flask
Freezer Air-cooled condensation full-sealed type: 400W R404A
Solvent recovery mechanism Capacitor cooling mechanism
Filter Cartridge filter
Instruments Cooling trap temperature display monitor Filter differential pressure meter (Monitor for clogging of filter) O2 density display monitor Blower wind amount adjusting volume
O2 sensor Solid electrolyte (Zirconium) limit current type
Pump For circulation to measure Oxygen
Safety device O2 density meter, Flammable gas alarm, Electric leakage breaker, N2 gas forced introduction (when removing nozzles)
Required N2 amount 15 L/h at 0.1 MPa
Accessories Set of connection parts, anti-seismic clamps, interface cable, sample gas for gas alarm inspection, 2L flask
External dimensions(W×D×H mm) 700×950×1500mm
Remarks(weight) 000V
Single phase AC200〜240V 5A(15A)
Weight 130kg

Optional items

NO IMAGE
Viton packing for cyclone inlet/outlet port (2 types/set) (OGF22)
NO IMAGE
Teflon packing for inlet/outlet port (2 types/set) (OGF24)
NO IMAGE
Filter element, 0.1μ (OGS10)
NO IMAGE
Dry airflow meter (Differential pressure type) (OGS12)