Products for Industry
Clean oven suitable for temperature test in dust-free environment.
Features of Clean Oven (DT411)
- V-type controller improves the display visibility and operability of the operation panel, with Power consumption / CO2 discharge monitor functioning as standard.
- Adoption of anti-fouling caster (preventing wheel contamination during transportation)
- Improvement of visibility of HEPA filter replacement timing by three color indication.
- Improvement of safety by phase-reversal relay, detecting of incorrect wiring of power supply when installing.
- Cable diameter changed from 30mm I.D to 33mm I.D when compare withconventional equipments.
- More options when compare with conventional equipment.
|Temp. distribution accuracy||±4.0°C (at 360°C) JTM K05|
|Max. temp. reaching time||Approx. 80 min.|
|Heater||Stainless pipe heater|
|Cable hole||33mm I.D. ×1|
|Timer||1 min. to 99 Hrs. 59 min|
|Operation function||Fixed temp., Auto-start, Auto-stop, Quick auto stop, program (Max.99 steps, 99 patterns, repeat)|
|Circulation method||Forced air circulation|
|Operating temperature range||Room temperature +30~360°C|
|Temp. adjustment accuracy||±0.3°C (at 360°C) JTM K05|
|Temp. fluctuation||±0.5°C (at 360°C) JIS|
|Temp. gradient||±20°C(at 360°C) JIS|
|Clean level||Class 100 (when the temperature is stable)|
|Exterior material||Cold rolled steel plate with melamine resin baking finish|
|Fan type||Sirocco fan, Condenser type motor|
|Differential pressure meter||Analog type (0~300 Pa)|
|Exhaust port||61mm O.D.×1|
|Filter||Heat resistant HEPA filter (dust collect : more than 99.97% at 0.3μm )|
|Caster||Wheel Dia. 50mm anti-fouling caster|
|Temp. controller||PID control by micro processor|
|Temp. setting method||Digital setting with UP/DOWN key|
|Temp display method||Digital display|
|Other display||Operation monitor (operation condition graphic display by LED patterns)|
|Additional functions||Calendar timer (max. 24 Hrs.), Calibration off-set function, Integration time (max. 65535Hrs.), Display the amount of power consumption/CO2 discharge/Heater operation amount, Power failure recovery mode, User setting information save and recall|
|Heater circuit control||Triac zero-cross control|
|Temp. sensor||K-thermocouple (double sensor)|
|Safety countermeasures||Self diagnosis functions (Sensor, Fan, Heater, Relay, Triac, Automatic overheat prevention), Independent overheat prevention, Key lock function, Electric leakage breaker, Door switch, Reverse phase protection|
|Shelf support step number||12 steps|
|Accessories Shelf plate||Stainless steel, 2 pcs|
|Accessories Shelf support||4 pcs|
|Internal dimensions（W×D×H mm）||450×450×450mm|
|External dimensions（W×D×H mm）||700×1025×1570mm|
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.