Products for Industry
Vacuum Drying Oven DP610P
Item Code : 212160
Model : DP610P
Vacuum Drying Oven (DP610P)
Vacuum pump linkage automatic sequence type which release the manual operation of a vacuum pump and a leak valve.
Features of Vacuum Drying Oven (DP610P)
- Automatic sequence vacuum drying oven
- Don't have to worry about the incorrect operation, reverse flow of vacuum pump oil when power off.
- Automatic sequence operation of vacuum pump linkage is possible.
- Saving space, high quality controller, individual overheating prevention and many others function.
- Prevent the reverse flow of vacuum pump oil when power off.
- There is no exhaust loss because of 1 inch solenoid vacuum valve.
- Automatic/manual switch is set up.
|Method||Vacuum drying by decompressed chamber direct heating|
|Operating pressure range||101 to 0.1 kPa (760 to 1 Torr) at absolute pressure|
|Max. temp. reaching time||Approx. 100 min.|
|Interior/Exterior material||Stainless steel/Cold rolled steel plate with baked-on melamine resin finish|
|Heater||Mica heater, 3.15 kW|
|Observation window||Tempered glass and polycarbonate resin plate|
|Vacuum gauge||Bourdon tube type, 0 to 0.1 MPa (Gauge pressure)|
|Temp. control method||PID control by microprocessor|
|Additional functions||Calendar timer (max. 24 Hrs.), Integration time (max 65535 Hrs.), Time display, calibration offset, power discharge, CO2 discharge, heater consumption display, power failure stagnation mode, user configuration information|
|Heater circuit control||Triac zero-cross control|
|Operating temperature range||40～200℃|
|Temp. adjustment accuracy||± 1.5°C (at 200°C)|
|Operation functions||Fixed temperature operation, auto-start operation, auto-stop operation, program operation ( 99 steps, 99 patterns repeat operation)|
|Temp. sensor||K-thermocouple (double sensor)|
|Safety countermeasures||Self diagnosis functions(Sensor, Heater, Triac, automatic overheating prevention), Independent overheating prevention, Key lock function, Electric leakage breaker|
|Shelf support step number/pitch||4 steps/140mm|
|Exhaust port / Purge port||NW25 flange / Rc 1/4|
|Accessories Shelf plate||Punched stainless steel, 2 pcs|
|Internal dimensions（W×D×H mm）||600×600×600mm|
|External dimensions（W×D×H mm）||820×819×1650mm|
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.