Products for Industry

Spray Dryer (Large Capacity) DL410

Item Code : 212730
Model : DL410

Spray Dryer (Large Capacity)DL410

Features of Spray Dryer (Large Capacity) (DL410)

Features: This spray dryer can produce fine particles from 40 to
100μm which are considered to be extremely difficult to
produce in laboratories. It is useful for preliminary tests for
pilot plant or expensive samples, micro capture spray
drying research, substitute for general laboratory drying
method etc.
Features: Air flow meter, pressure gauge and other measurements allow easy control of experiment conditions
Features: Safe for heat-sensitive samples, such as food or medical products
Features: Digital display of inlet/outlet temperature and drying air volume
Features: Detachable drying chamber, cyclone and product vessel
Easy operation and maintenance: The hot air inlet and drying chamber cover automatically move up and down, and since the cyclone and product vessel can easily be removed,
cleaning and maintenance after your experiment is easy
Features: Control functions are conveniently arranged on the control panel for various conditions

Item Code	212730
Model	DL410
Water evaporation rate	Max. approx. 3,000 ml/h
Temperature control range	40°C - 300°C at inlet
Dry air flow rate	0.3 - 1.0 m³/min
Spraying system	Two-way nozzle (Dia. of orifice: 0.7mm) Nozzle No.3 standard supply
Spray/hot air contact system	Downward spray parallel flow system
Temperature controller	PID digital temperature controller
Temperature sensor	K thermocouple
Stainless pipe heater	2kW×2
Sample liquid feeding pump	Flow rate variable up to 70ml/min.
Drying chamber	Ultra hard glass, I.D. 457 x 975(H) mm
Spray line cleaning	Needle inside the nozzle to clean the mesh automatically
Safety device	Inlet/Outlet temp. overheat, Sample feed reverse rotation mechanism, Overheat prevension of heat room, ELB, Safety cover
Air spray pressure gauge	Bourdon tube: 0 - 0.3 M Pa
Included Accessories/Sample liquid tube	Silicone tube - 2 pcs
Included Accessories/Static removal brush	1pc
Included Accessories/Air hose	1 pc
Included Accessories/Exhaust duct	1 pc
Nozzle	4, 5 (options), 3 standard
Compressed air	28 L/min air volume and 8 kgf/cm2 compressed air is required
External dimensions（W×D×H mm）	1060×880×1750mm
Power Source	AC220V 22A Single phase
Weight	180kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.