Products for Industry
Natural Convection Ovens for Glassware Drying
Features of Fail-Safe Oven (DGS400)
- By limiting the temperature control range to 110oC, which is sufficient for the drying laboratory tools, it prevents the inadvertent errors such as incorrect operation that lead to high temperature.
- Large observation window makes it easy to confirm the condition inside the chamber.
- Independent overheating prevention device is equippedin front of the oven for easy set up and condition confirmation purpose.
|Ambient temperature range||5 to 35℃|
|Operating temperature range||(Room temp. +5) to 110°C|
|Exterior material||Cold rolled steel plate with melamine resin baked finish|
|Interior material||Stainless steel|
|Heat insulating material||Glass wool|
|Observation window||Tempered glass 250×280Hmm|
|Heater||SUS pipe heater 600W|
|Exhaust port||I.D 30mm×2 with lid (top)|
|Temp. controller||PID control by microprocessor|
|Temp. setting method||Digital setting by UP/DOWN Key|
|Operation function||Fixed temperature, Auto start, Auto stop, Quick auto stop|
|Timer||1 min to 99 hrs. 59 min and 100 hrs. to 999 hrs. 50 min|
|Additional functions||Key lock, Power failure return mode, Calibration offset function.|
|Safety Device||Self diagnosis functions (Temp. sensor abnormal, Memory abnormal, Automatic overheating prevention, Measured temp. abnormal)|
|Safety Device||Maintenance functions (Overcurrent leakage breaker, Independent overheat prevention device (thermostat)|
|Effective dimensions||430mm x 460mm x 395mm|
|Shelf support step number/pitch||10 steps / 30mm|
|Accessories||Shelf plate×1pc / Shelf bracket×1set (The lowest shelf is separately fixed inside chamber )|
|Internal dimensions（W×D×H mm）||460×460×450mm|
|External dimensions（W×D×H mm）||560×565×755mm|
Single-phase with step-down transformer
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.