Products for Industry
Fine oven with an explosion preventive vent door.
Features of Fine Oven (with Explosion Vent) (DF612S)
- The product is equipped with a safety door to relief an explosion pressure (explosion preventive vent door) and an interlock door knob that reliably secure the main unit and the door.
- The product is integrated with the following interlock functions:
I) Operation can be started by closing the door with the door lock.
II) The main power will be shut off when the explosion detection switch on the ceiling is activated.
- Standard functions include program operation and other high precision functions.
- Improved safety functions include the self diagnostic function, the automatic overheat prevention function, and the key lock function
|Method||Forced convection and ventilation|
|Operating temp. range||RT+10°C to 260°C|
|Temp. gradient||10℃（at 260℃）|
|Temperature control||PID control with a micro computer|
|Operation & control||Fixed temp., Auto-start, Auto-stop, Quick auto stop, program (Max.99 steps, 99 patterns, repeat)|
|Additional functions||Calendar timer (max. 24hrs.), Integration time (max. 65535hrs.), calibration off-set, Display the amount of power consumption/CO2 discharge / Heater operation amount,|
|Additional functions||Power failure recovery mode, User setting information save and recall, Wind velocity changeable function|
|Temp. sensor||K-thermocouple (double sensor)|
|Heater||Stainless pipe heater|
|Fan||Axial fan (Condenser motor: 20W)|
|Cable port||I.D. 30mm (rear panel)|
|Heat insulator||Glass wool|
|Other additional function||Explosion preventive vent door|
|Safety functions||Self diagnosis functions(Sensor, Fan, heater, Relay, Triac, Automatic overheat prevention), Independent overheat prevention, Key lock function, Electric leakage breaker, Door switch|
|Accessories Shelf||Stainless wire|
|Accessories Shelf||3 pcs.|
|Accessories Shelf support||6 pcs.|
|Internal dimensions（W×D×H mm）||600×600×600mm|
|External dimensions（W×D×H mm）||1200×780×1400mm|
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.