Products for Industry
Laboratory Washer (Process Monitorable)AWD510DRY
Item Code : 291070
Model : AWD510DRY
●Water purifier WL220T(optional item) The use of a pure waterfeed system or the water purifier WL220T enables rinsing with pure water. ●Stand (optional item) With casters/adjuster. Capable of housing the washing bottles and test tube racks.
Color lighting to make it easy to determine the stage of the washing process.
Features of Laboratory Washer (Process Monitorable) (AWD510DRY)
- Large double glass window affording a good viewof the inside.
- Powerful alkaline is set as standard liquid detergent.
- Effluent temperature controlled to stay at 60°C or below.
- Feed-water connection established between the rack and main body simply by closing the door.
|Washing system||Upper / Middle / Lower-stage rotating jet nozzles|
|Washing process||Pre-washing, Washing, Rinsing, Rinsing with pure water (optional), Pre-drying (optional)|
|Water temp.||Set Off to Max. 80℃ (pre-washing / washing), Max. 93℃ (rinsing)|
|Hot-water supply||2kW Pipe heater|
|Detergent supply||Automatic weighing and loading (liquid detergent)|
|Drain method||Hot water cooling and forced draining with pump|
|Water supply Tap water (Necessary)||Temp. 5 to 25℃ , Raw water feed pressure 0.1 ～ 0.5MPa, G3/4 (main unit), G1/2 (primary)|
|Water supply Hot water (Discretionally)||Temp. 5 to 60℃ , Raw water feed pressure 0.1 ～ 0.5MPa, G3/4 (main unit), G1/2 (primary)|
|Detergent||Dedicated detergent (optional)|
|Pure water connection (Discretionally )||Raw water feed pressure 0.02 ～ 0.1MPa, Hose nipple I.D. 10.5mm|
|Exterior||Stainless steel plate （SUS304）|
|Interior||Stainless steel plate （SUS304）|
|Display||Over current/Electric leakage breaker, Overheat prevention, Door lock, Water leakage|
|Drying method (optional)||Hot-air drying (HEPA filter, fixed at approx. 60℃ )|
|Over current/Electric leakage breaker, Overheat prevention, Door lock, Water leakage||Raw water supply hose (for tap water and hot water), Drain hose, Lid for removing upper-stage rack, Stainless steel rack for detergent, Drain hose clamp, Overflow water hose, Detergent tube|
|Internal dimensions（W×D×H mm）||500×480×490mm|
|External dimensions（W×D×H mm）||580×600×840mm|
Single-phase with step-down transformer
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.