Products for Industry
Laboratory Washer (Process Monitorable) AWD510
Item Code : 291020
Model : AWD510
●Water purifier WL220T(optional item) The use of a pure waterfeed system or the water purifier WL220T enables rinsing with pure water. ●Stand (optional item) With casters/adjuster. Capable of housing thewashing bottles and test tube racks.
Color lighting to make it easy to determine the stage of the washing process.
Features of Laboratory Washer (Process Monitorable) (AWD510)
- Large double glass window affording a good viewof the inside.
- Powerful alkaline is set as standard liquid detergent.
- Effluent temperature controlled to stay at 60°C or below.
- Feed-water connection established between the rack and main body simply by closing the door.
|Washing system||Upper / Middle / Lower-stage rotating jet nozzles|
|Washing process||Pre-washing, Washing, Rinsing, Rinsing with pure water (optional)|
|Water temp.||Set Off to Max. 80℃ (pre-washing / washing), Max. 93℃ (rinsing)|
|Hot-water supply||2kW Pipe heater|
|Detergent supply||Automatic weighing and loading (liquid detergent)|
|Drain method||Hot water cooling and forced draining with pump|
|Water supply Tap water (Necessary)||Temp. 5 to 25℃ , Raw water feed pressure 0.1 to 0.5MPa, G3/4 (main unit), G1/2 (primary)|
|Water supply Hot water (Discretionally)||Temp. 5 to 60℃ , Raw water feed pressure 0.1 to 0.5MPa, G3/4 (main unit), G1/2 (primary)|
|Detergent||Dedicated detergent (optional)|
|Pure water connection (Discretionally )||Raw water feed pressure 0.02 to 0.1MPa, Hose nipple I.D. 10.5mm|
|Exterior||Stainless steel plate （SUS304）|
|Interior||Stainless steel plate （SUS316）|
|Display||4.3-inch LC touch panel / LED lamp (process) / Interior lighting color by process|
|Safety Device||Over current/Electric leakage breaker, Overheat prevention, Door lock, Water leakage|
|Accessories||Raw water supply hose (for tap water and hot water), Drain hose, Lid for removing upper-stage rack, Stainless steel rack for detergent, Drain hose clamp, Overflow water hose, Detergent tube|
|Internal dimensions（W×D×H mm）||500×480×480mm|
|External dimensions（W×D×H mm）||580×600×845mm|
Single phase with step-down transformer
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.