Products for Industry

Spray Dryer ADL311S-A

Item Code : 212738
Model : ADL311S-A

Example of installation: ADL311SA + GAS410

Spray Dryer (ADL311S-A)

Spray DryerADL311S-A

Product Summary

Easily micronize liquid samples with a spray dryer

Features of Spray Dryer (ADL311S-A)

ADL311SA: For aqueous soluble samples: (When organic solvent is used, a GAS410 organic
solvent recovery unit is required.)
Features: Easy setup, easy operation
Features: Suitable for heat sensitive samples. High heat is not
directly applied to dry, fine powder
Features: Obtain contaminant free fine powder which is not
oxidized and contains minimal moisture
Features: Direct drying of solution or solution liquid into fine
powder. No pre- or post processes such as filtration,
separation, or pulverization required
Features: Safe and explosion free working is guaranteed in
combination with GAS410 due to oxygen & pressure
control
Features: Organic solvents are recovered in a closed loop to
protect the environment to enable minimized pollution
Features: Easy operation with one-touch detachable mechanism
for drying chamber and cyclone
Features: An arm jack is equipped as standard for easy installation
and removal of glassware attachments
Features: A service outlet (max.2A) and a sample stand are
equipped as standard for connecting a magnetic
mixer for stirring suspended liquid samples
Features: Unique peristaltic pump, nozzle cooling mechanism,
pulse jet mechanism and a nozzle knocker for stable
spray drying
Features: ADL311SA is highly mobile on wheels, or usable
with shorter height as a bench top unit by removing
the movable caster

Specifications

Item Code	212738
Model	ADL311S-A
Temp. adjusting unit setting range	40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature)
Temperature adjusting accuracy	Inlet temperature±1°C
Drying air amount adjusting range	0 to 0.7m3/min
Spray air pressure adjusting range	0 to 0.3MPa
Liquid sending pump flow rate range	0 to 26 mL/min
Spray air line washing function	Spraying at the nozzle tip, Manual pulse jet system
External output	Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Temperature adjusting device	PID digital temperature adjusting device
Touch panel	Blower, Heater, Liquid sending pump, Pulse jet switch, error display
Control select switch	Inlet temperature, Outlet temperature control switch(Outlet temperature control is conditional)
Temperature sensor	K-thermocouple
Heater	2.0kW (at200V) to 2.88kW (at240V)
Liquid sending	Fixed amount peristaltic pump
Spraying air pump	For water soluble samples air compressor is used (sold separately). For organic solvent samples the integrated compressor in GAS410 is used (No separate air compressor required).
Service outlet	For stirrer: AC100V, MAX. 2A
Suction blower	Bypass blower
Filter	Suction filter, Exhaust filter
Recovery of solvent	Solvent recovery unit GAS410 (Sold separately) is used
Spray nozzle cooling mechanism	Connector: nipple×2, O.D.: ø10.5mm
Spray air connection diameter	Nipple diameter: ø7mm
Spray air pressure	Bourdon tube: 0.3 MPa
Exhaust connecting diameter	ø50mm
Safety function	Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
External dimensions（W×D×H mm）	580×420×1125mm
Power Source	AC200-AC240V 16-18A Single phase
Weight	80kg
Accessories	Silicon tubes (with a stopper)×3, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, "Tetron" braided tube hose 5m (with two hose bands)