Products for Industry
Achieves water quality A4 with minimal consumables Features of Auto Still ® (WG205), a pure water production device (distilled water production device)
Features of Water Purifier (Ion-exchange + Distillation) (WG205)
- High pure water can be collected by ion exchange ⇒ distillation.
- The water quality is A4 level for both distilled water and ion-exchanged water.
As an option, a membrane filter can be attached to the water sampling port.
- Better design
- The width and depth have become more compact. It can be installed in a small space.
WG204： W600×D575×H780mm → WG205：W540×D575×H775mm
- Equipped with automatic boiler drainage function
- It is said that when distillation is performed continuously for a long time, impurities that have not evaporated are concentrated in the boiler. Since it may affect the water quality, there is an advantage that the water quality can be stabilized by automatic boiler drainage for 5 hours.
- Easy replacement of Ion exchange resin
- Ion exchange resin can be easily replaced with a one-touch joint.
It is also possible to add two cartridges to reduce the frequency of cartridge replacement. (WG1012 standard is 2 cartridges).
Accessibility has been improved by separating the daily maintenance part on the left side and the service part on the right side.
|Water purifying method||Ion exchange → distillation|
|Sampled pure water method||Ion-exchanged water / distilled water|
|Distilled water production||About 1.5L / h|
|Amount of distilled water collected||Approximately 1.5 L / min|
|Ion-exchanged water sampling amount||Approximately 1.0 L / min|
|Collection capacity setting range||Continuous water sampling|
|Heater||Ceramic heater 1.2kW|
|Pretreatment cartridge||0.1 μm hollow fiber + activated carbon (PWF-1)|
|Ion exchange resin cartridge||1 CPC-S 4L type (with activated carbon)|
|Distilled water / ionized water final filtration||Membrane filter (Optional)|
|leak detection||Forced shutoff of water supply by leak detection sensor|
|Distilled water storage tank||20L polyethylene tank|
|Distilled water UV sterilization||-|
|Water sampling sink||-|
|Multipurpose distilled water sampling port||For Φ8 hard tube connection (right side of the main body)|
|Standard raw water pressure range||0.05～0.5 MPa|
|Standard Raw water requirement||Approximately 2.0 L / min|
|Standard ambient temperature range||5～35 ℃|
|Function Distilled water tank water level display||Communication pipe water level display|
|Distilled water tank full water setting||-|
|Display / setting Water quality display||LED display with 5 levels of conductivity|
|Display / Settings Other displays||Ion exchange resin exchange display|
|Accessories||1 water hose (2 m), 1 water hose filter, 1 connection hose assembly, 1 can stone cleaner, 1 pretreatment cartridge, 1 ion exchange resin cartridge, 1 instruction manual, 1 warranty|
|External dimensions（W×D×H mm）||540×575×775mm|
Single-phase with step-down transformer