Products for Industry

Economical Forced Convection Oven DKM400

Discontinued Product

Item Code : 212877
Model : DKM400

DKM600 with stand (optional, ON61)


Exhaust port, 30 mm l.D.×2 pcs.(the top)

Cable Hole, 30 mm l.D.×1 pc. (right side)


Comparison of temperature increase time with conventional products


Economical Forced Convection Oven (DKM400)

Product Summary

Basic fixed setting forced air convection ovens

Features of Economical Forced Convection Oven (DKM400)

Basic fixed setting forced air convection ovens
Forced convection, constant temperature oven with simple operation functions.
Fixed temperature, Quick Auto stop, Auto stop, and Auto start operating modes are possible, along with easy control capabilities
Settings can be made digitally using the dedicated operation menu keys or the up and down keys
Auto recovery after power failure, calibration offset and key-lock are possible through the auxiliary functions
Safety features
Self-diagnostic functions, Auto overheat prevention, Independent overheat prevention



Item Code 212877
Model DKM400
Circulation method Forced air circulation
Operating temperature range Room temp. +10~260°C
Temp. control accuracy ±1°C (at 210°C)
Temp. distribution accuracy ±2.5℃(at 210℃)
Max. temp. reaching time Approx. 90 min. (at room temp. +10°C~260°C)
Interior material Stainless Steel
Exterior material Cold rolled steel plate with melamine resin baking finish
Heat insulating material Glass wool
Heater SUS pipe heater
Heater 1.2kW
Fan type / Motor Scirocco fan / Condenser type motor
Cable port 30 mm l.D.×1 pc. (right side)
Exhaust port 30 mm l.D.×2 pcs.(the top)
Temp. controller PlD control by microprocessor
Temp. setting method Operation menu key and digital setting by UP/DOWN key
Temp display method Measurement temp. : Digital display by green LED Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. (with time wait function)
Operation functions Fixed temperature operation, Quick Auto-stop, Auto start, Auto stop
Additional functions Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control SSR control
Sensor K-thermocouple
Safety device Self diagnostic functions (Sensor trouble detection, Memory error, Measured temperature lower limit error, Measured temperature error), Auto overheat prevention, Independent overheat prevention.
Shelf plate with standard load 15kg/pc.
Shelf support step number 11 steps
Shelf support pitch 30mm
Shelf plate Stainless steel
Shelf plate 2 pcs.
Shelf support 4 pcs.
Internal dimensions(W×D×H mm) 450×450×450mm
Internal capacity 90L
External dimensions(W×D×H mm) 560×601×820mm
Power Source AC220V 6A
Single phase
Weight 50kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.


Optional items

Stand (ON61)
Stacking support (OD40)
Stainless punching metal shelf
Cable port (ODK32)
Cable port (ODK34)
Seismic isolation rubber

Same series products

Economical Forced Convection Oven (DKM300)
Economical Forced Convection Oven (DKM600)