Products for Industry

Spray Dryer (Large Capacity) DL410

Item Code : 212730
Model : DL410

Spray Dryer (Large Capacity) (DL410)

Spray Dryer (Large Capacity)DL410

Product Summary

Features of Spray Dryer (Large Capacity) (DL410)

Features
This spray dryer can produce fine particles from 40 to
100μm which are considered to be extremely difficult to
produce in laboratories. It is useful for preliminary tests for
pilot plant or expensive samples, micro capture spray
drying research, substitute for general laboratory drying
method etc.
Features
Air flow meter, pressure gauge and other measurements allow easy control of experiment conditions
Features
Safe for heat-sensitive samples, such as food or medical products
Features
Digital display of inlet/outlet temperature and drying air volume
Features
Detachable drying chamber, cyclone and product vessel
Easy operation and maintenance
The hot air inlet and drying chamber cover automatically move up and down, and since the cyclone and product vessel can easily be removed,
cleaning and maintenance after your experiment is easy
Features
Control functions are conveniently arranged on the control panel for various conditions

Specifications

Specifications

Item Code 212730
Model DL410
Water evaporation rate Max. approx. 3,000 ml/h
Temperature control range 40°C - 300°C at inlet
Dry air flow rate 0.3 - 1.0 m³/min
Spraying system Two-way nozzle (Dia. of orifice: 0.7mm) Nozzle No.3 standard supply
Spray/hot air contact system Downward spray parallel flow system
Temperature controller PID digital temperature controller
Temperature sensor K thermocouple
Stainless pipe heater 2kW×2
Sample liquid feeding pump Flow rate variable up to 70ml/min.
Drying chamber Ultra hard glass, I.D. 457 x 975(H) mm
Spray line cleaning Needle inside the nozzle to clean the mesh automatically
Safety device Inlet/Outlet temp. overheat, Sample feed reverse rotation mechanism, Overheat prevension of heat room, ELB, Safety cover
Air spray pressure gauge Bourdon tube: 0 - 0.3 M Pa
Included Accessories/Sample liquid tube Silicone tube - 2 pcs
Included Accessories/Static removal brush 1pc
Included Accessories/Air hose 1 pc
Included Accessories/Exhaust duct 1 pc
Nozzle 4, 5 (options), 3 standard
Compressed air 28 L/min air volume and 8 kgf/cm2 compressed air is required
External dimensions(W×D×H mm) 1060×880×1750mm
Power Source AC220V 22A
Single phase
Weight 180kg

Maintenance and warranty


Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.



Catalog

Documents