Products for Industry

Low Temperature Incubator (Programmable, Peltier Cooling) IJ201

Item Code : 221158
Model : IJ201

From left side IJ101 IJ201 IJ300

Air jacket for IJ1O1/101W

Low Temperature Incubator (Programmable, Peltier Cooling) (IJ201)

Low Temperature Incubator (Programmable, Peltier Cooling)IJ201

Product Summary

Fixed Temp. Incubator from small to large capacity, high functional and best-selling for long years

Features of Low Temperature Incubator (Programmable, Peltier Cooling) (IJ201)

Highly functional fixed temp. incubator with varying capacity.
A compact model ideal for preserving samples and for constant temperature testing
Feature
A CFC-free, low-vibration model with a cooler equipped with peltier elements
Feature
Uses a programmable temperature controller (IJ201/300)
Feature
Has a convenient pre-reset temperature function ( as an option)
Feature
Air jacket can be attached as an option
Feature
Two units can be stacked by the stacking support (Option)
Feature
The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss
Feature
A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model.
Feature
Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker.

Specifications

Specifications

Item Code 221158
Model IJ201
Type Forced convection
Operating Temperature Range 5~60℃(at room temp.25℃)
Temp. Control Accuracy ±0.5℃(at 37℃)
Temp. Distribution Accuracy ±1.0℃(at 37℃)
Time to Max. Temp. 20~60℃ 50min.
Time to Lowest Temp. 20~5℃ 120min.
Interior Stainless steel
Heater Pipe heater 150W
Condenser Peltiert element, Forced radiation type
Temp. Control Method PID
Operation Function Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation
Additional Functions Calibration off-set, Key-lock function, Auto recovery function at power failure
Sensor Double sensor: Platinum resistance Pt 100Ω (Temp. controller), K-thermocouple(Overheat preventor)
Safety Functions Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error
Shelf Loading Capacity Approx. 10kg/ shelf
Shelf Step 8 steps
Accessories Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc.
Temp. Setting Method Dedicated operation menu key and digital setting by UP/DOWN key
Internal dimensions(W×D×H mm) 300×300×300mm
External dimensions(W×D×H mm) 580×417×437mm
Remarks(dimensions) 27L
Power Source AC115V/AC220V
single phase with step-down transformer
Weight 25kg

Maintenance and warranty


Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.



Catalog

Optional items

NO IMAGE
Shelf (1 shelf with 2 supports) (For IJ201)
NO IMAGE
Air jacket (For IJ201)
NO IMAGE
Stacking support (For IJ201)
NO IMAGE
External communication terminal (RS485) (For IJ series)
NO IMAGE
External communication adapter (For IJ series)
NO IMAGE
External alarm terminal (For IJ series)
NO IMAGE
Temperature output terminal (4-20mA) (For IJ series)
NO IMAGE
Time-up output terminal (For IJ series)
NO IMAGE
Inner door (For IJ201)
Inner door for air jacket (For IJ201)

Same series products

Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101)
Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101W)
Low Temperature Incubator (Programmable, Peltier Cooling) (IJ300)