Products for Industry

Forced Convection Oven (Airflow Control) DNF911

Item Code : 212879
Model : DNF911

Front View、Stand is option

Controller

Interior

Controller

Forced Convection Oven (Airflow Control) (DNF911)

Forced Convection Oven (Airflow Control) DNF911

Product Summary

Programmable forced convection oven with variable flow rate

Features of Forced Convection Oven (Airflow Control) (DNF911)

Model: DNF811/911
Digital variable wind velocity. Forced convection type.
Model: DNF811/911
Incorporates with maximum 99 steps, 99 patterns program controller with repeat function.
Model: DNF811/911
Loaded with Total Operation Hours Timer.
Model: DNF811/911
Exhaust damper enable fast exhaust and cooling of inside.
Model: DNF811/911
Cable port useful for a monitor for temperature during testing is equipped as standard.

Specifications

Specifications

Item Code 212879
Model DNF911
Method Forced convection with manual exhaust damper
Heater 1.65 kW×2
Exhaust port 50mm I.D. (Back) x 2pc.
Additional functions Integration time (max. 65535Hrs.), Calibration off-set, Display the amount of Power consumption / CO2 discharge /
Sensor K-thermocouple ×2pcs.
Shelf plate with standard load Approx. 15kg/piece
Forced convection (Wind velocity setting:1-10) Operating temp. range Room temp. +15 to 260°C
Forced convection (Wind velocity setting:1-10) Temp. control accuracy (JTM K05) ±0.3°C(at 260°C)
Forced convection (Wind velocity setting:1-10) Temp. fluctuation (JIS) 1.6℃(at 260℃)
Forced convection (Wind velocity setting:1-10) Temp. distribution accuracy (JTM K05) ±2.5℃(at 260℃)
Forced convection (Wind velocity setting:1-10) Temp. gradient (JIS) 6℃(at 260℃)
Forced convection (Wind velocity setting:1-10) Max. temp. reaching time Approx. 100 min.
Interior / Exterior material Stainless steel / Electro-galvanized steel sheet with epoxy and melamine resin baking finish
Heat insulating material Glass wool
Cable hole 33mm I.D. (Right)×1pc.
Air in-take hole 33mm I.D. (Right and Left) ×1pc. each
Temp. controller PlD control by microprocessor
Temp. setting method Digital setting by UP/DOWN key
Additional functions Heater operation amount, Power failure recovery mode, User setting information save and recall, Wind velocity changeable function
Safety countermeasures Self diagnosis functions (Sensor, Fan, Heater, Relay, Triac, Automatic overheat prevention), Independent overheat prevention, Key lock function, Electric leakage breaker, Door switch
Shelf support step number 29 steps x 2
Shelf support pitch 30 mm
Accessories Shelf (Stainless punching metal) 8 pcs.
Accessories Shelf support 16 pcs.
Internal dimensions(W×D×H mm) 1090×500×1000mm
External dimensions(W×D×H mm) 1220×695×1685mm
Remarks(dimensions) 540L
Power Source AC220V 16A
Single-phase
Weight 210kg

Maintenance and warranty


Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.



Catalog

Optional items

Stainless punching metal shelf (DKNDNEDNF9)
NO IMAGE
External communication adapter set (OIN90)
NO IMAGE
Additional sensor (sheath sensor) (ODT48)
NO IMAGE
Silicon plug (with one hole) (ODT52)
Cable port (ODM36)
Cable port (ODM38)
NO IMAGE
External communication terminal (RS485) (ODM58)
NO IMAGE
External alarm output terminal (ODM62)
NO IMAGE
Timeup output terminal (ODM66)
NO IMAGE
Operation signal output terminal (ODM70)
NO IMAGE
Event output terminal (ODM74)
Digital recorder (YHR150)
Digital recorder (YHR250)
NO IMAGE
Cable for Recorder (ODM76)
NO IMAGE
Exhaust duct (ODM54)

Same series products

Forced Convection Oven (Airflow Control) (DNF301)
Forced Convection Oven (Airflow Control) (DNF401)
Forced Convection Oven (Airflow Control) (DNF411)
Forced Convection Oven (Airflow Control) (DNF601)
Forced Convection Oven (Airflow Control) (DNF611)
Forced Convection Oven (Airflow Control) (DNF811)