Products for Industry
Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) DKG850V
Item Code : 212891
Model : DKG850V
Reduced heating time to 1/2.5, cooling time to 1/4 (compared with conventional company products), horizontal air flow appropriate for loaded operation, the standard oven for production lines supporting multi power supplies. The product lineup includes a silicon free type.
Features of Industrial Forced Convection Oven (Silicorn/Fluoro-rubber Gasket) (DKG850V)
- Standard oven with simple operation whose temperature increase and decrease time has been improved 50% or more compared with conventional products to reduce product takt time.
- Temperature increase time has been reduced up to 1/2.5 (at no load, compared with conventional company products), temperature decrease time has also been reduced to 1/4 (at no load, compared with conventional company products). Extensive increase in work efficiency is expected.
- Employment of a total exhaust system in which air supply and discharge are linked by operation of the manual damper at the front realizes extensive reduction in temperature decrease time.
- The horizontal air flow system ideal for processing samples in a magazine rack or a lot of samples realizes high precision temperature performance even at loaded condition.
- Fluoro rubber is employed for shoulder packing to realize silicon free. (DKG610V/650V/810V/850V)
- Product lineup includes 610/610V/810/810V for 200 to 220V power supply and 650/650V/850/850V for 230 to 300L 240V to support multiple power supplies.
|Operating temperature range||Room temp. +30°C to 260°C|
|Temperature adjustment accuracy||±0.5℃|
|Temperature distribution accuracy||±2℃（at 200℃）、±2.5℃（at 260℃）|
|Time to attain max. temp.||Within 50min. from 25°C ->260°C|
|Temp. decrease time||About 40min. from 260°C ->50°C|
|Air supply/exhaust damper||Front operation/manual damper Air supply pipe/exhaust pipe at the rear NSSC180 With exhaust duct|
|Interior/exterior||Stainless steel plate/chrome free electro galvanized steel plate Chemical proof baking finish|
|Heater and heat insulator||SUS pipe heater & glass wool|
|Heater capacity||230 to 240V 3.6 to 3.92kW|
|Blower fan||Sirocco fan×2|
|Fan motor||Condenser type motor × 2pcs|
|Cable port||I.D.: 30mm One at the right side of the main body|
|Air supply port||Bottom of heater room (Open/Close with a manual damper)|
|Damper control||Linked air supply / Exhaust with manual knob on the front of the main body|
|Exhaust port||Upper part of rear of the main body: φ80 (Open / Close with a manual damper)|
|Heater control||SSR control|
|Sensor||K-thermocouple (for temp. adjustment, Indivisual overheating prevesion)|
|Safety unit||Self diagnostic function (Temperature sensor error, Heater disconnection, SSR short-circuit, Automatic overheat prevention function), Key lock,|
|Safety unit||Program lock, Overheat preventive device, Over current electric leakage breaker, Door switch, Temperature fuse, External alarm terminal|
|Internal dimensions（W×D×H mm）||600×500×1000mm|
|External dimensions（W×D×H mm）||770×696×1674mm|
|Withstand load of shelf||15 kg / pc.|
|Shelf support step number||15 steps|
|Shelf support pitch||60mm|
|Accessories Shelf||4 pcs.|
|Accessories Shelf support||8 pcs.|
AC230 to 240V
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.