Products for Industry

Spray DryerADL-311SA

Item Code : 212738
Model : ADL-311SA

Spray Dryer (ADL-311SA)

Product Summary

Easily micronize liquid samples with a spray dryer

Features of Spray Dryer (ADL-311SA)

ADL311SA: For aqueous soluble samples
(When organic solvent is used, a GAS410 organic solvent recovery unit is required.)
Features
Easy setup, easy operation
Features
Suitable for heat sensitive samples. High heat is not directly applied to dry, fine powder
Features
Obtain contaminant free fine powder which is not oxidized and contains minimal moisture
Features
Direct drying of solution or solution liquid into fine powder. No pre- or post processes such as filtration, separation, or pulverization required
Features
Safe and explosion free working is guaranteed in combination with GAS410 due to oxygen & pressure control
Features
Organic solvents are recovered in a closed loop to protect the environment to enable minimized pollution
Features
Easy operation with one-touch detachable mechanism for drying chamber and cyclone
Features
An arm jack is equipped as standard for easy installation and removal of glassware attachments
Features
A service outlet (max.2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid samples
Features
Unique peristaltic pump, nozzle cooling mechanism, pulse jet mechanism and a nozzle knocker for stable spray drying
Features
ADL311SA is highly mobile on wheels, or usable with shorter height as a bench top unit by removing the movable caster

Specifications

Specifications

Item Code 212738
Model ADL-311SA
Supported samples Water soluble samples
Evaporated water amount Max. 1300mL/h
Spraying system Two-way nozzle, Nozzle No. 1A as standard (0.4mm)
Temp. adjusting unit setting range 40 to 220°C (inlet temperature), 0 to 98°C (Outlet temperature)
Temperature adjusting accuracy Inlet temperature±1°C
Drying air amount adjusting range 0 to 0.7m3/min
Spray air pressure adjusting range 0 to 0.3MPa
Liquid sending pump flow rate range 0 to 26 mL/min
Spray air line washing function Spraying at the nozzle tip, Manual pulse jet system
External output Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Temperature adjusting device PID digital temperature adjusting device
Touch panel Blower, Heater, Liquid sending pump, Pulse jet switch, error display
Control select switch Inlet temperature, Outlet temperature control switch(Outlet temperature control is conditional)
Temperature sensor K-thermocouple
Heater 2.0kW (at200V) to 2.88kW (at240V)
Liquid sending pump Fixed amount peristaltic pump
Spraying air pump For water soluble samples air compressor is used (sold separately). For organic solvent samples the integrated compressor in GAS410 is used (No separate air compressor required).
Service outlet For stirrer: AC115V, MAX. 2A
Suction blower Bypass blower
Filter Suction filter, Exhaust filter
Recovery of solvent Solvent recovery unit GAS410 (Sold separately) is used
Spray nozzle cooling mechanism Connector: nipple×2, O.D.: ø10.5mm
Spray air connection diameter Nipple diameter: ø7mm
Spray air pressure Bourdon tube: 0.3 MPa
Exhaust connecting diameter ø50mm
Safety function Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
Accessories Silicon tubes (with a stopper)×3, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, "Tetron" braided tube hose 5m (with two hose bands)
External dimensions(W×D×H mm) 580×420×1125mm
Remarks(weight) AC220V 17A
Single phase
Weight 80kg

Optional items

NO IMAGE
Fine particulate sample collecting cyclone (OGF10)
NO IMAGE
Safety cover (ODL22)
NO IMAGE
Static removal brush set (ODL38)
NO IMAGE
Regulator (ODL40)
NO IMAGE
Viton packing for cyclone inlet/outlet port (2 types/set) (OGF22)
NO IMAGE
Teflon packing for inlet/outlet port (2 types/set) (OGF24)
NO IMAGE
Supply air filter box (for 0.3μm collection) (ODL40)