Products for Industry

Product Summary

Easily grinds sample into fine powder with the spray drying system

Features of Spray Dryer (ADL-311A)

Features
Because this product applies heat on fine grain sample instantly and does not apply high temperature on dry fine powdersample itself, samples unstable to heat can be reliably changed into even fine powder
Features
Prepared fine powder will not be oxidized and contains minimum water and is contamination-free
Features
Drying is made directly from solution or suspension liquid sample into fine powder, which does not need pre- or post processes such as filtration, separation, or pulverization necessary in the conventional drying method and can be used without concern of contamination during a series of operations

Specifications

Specifications

Item Code 212737
Model ADL-311A
Temp. adjusting unit setting range 40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature)
Temperature adjusting accuracy Inlet temperature±1deg.C
Drying air amount adjusting range 0〜0.7m3/min
Spray air pressure adjusting range 0〜0.3MPa
Liquid sending pump flow rate range 0〜26 ml/min
Spray air line washing function Spraying at the nozzle tip, manual pulse jet system
External output Inlet temperature, outlet temperature, temperature outlet (4-20 mA)
Temperature adjusting device PID digital temperature adjusting device
Touch panel Blower, heater, liquid sending pump, pulse jet switch, error display
Control select switch Inlet temperature, outlet temperature control switch (Outlet temp. control is conditional.)
Temperature sensor K-thermocouple
Heater 2.0 kW (at 200V) to 2.88 kW (at 240V)
Liquid sending Fixed amount peristaltic pump
Spraying air pump Spraying air compressor (sold separately) is used
Service outlet For stirrer: AC100V, MAX2A
Suction blower Bypass blower
Filter Suction filter, exhaust filter
Recovery of solvent -
Spray nozzle cooling mechanism Connector: nipple x 2, O.D.:φ10.5 mm
Spray air connection diameter Nipple diameter:φ7 mm
Spray air pressure Bourdon tube: 0.3 MPa
Exhaust connecting diameter φ50mm
Safety function Inlet/outlet temperature overheat, sample feed reverse rotation mechanism, over current electric leakage breaker, nozzle connection error
External dimensions(W×D×H mm) 580×420×1125mm
Power Source AC115/220VV
AC115/220V Single phase
Weight 80kg

Remarks(specifications)

付属品: シリコンチューブ(ストッパ付き)3本、排気ダクト(ホーバンド1個付き)1本、出口温度センサ、噴霧空気チューブ、試料BOX、静電除去アース、テトロンブレードホース5m(ホースバンド2個付き)、容器台、テトロンブレードホース5m(ホースバンド2個付き)

Same series products

Spray Dryer (ADL-311SA)