What’s New

Yamato Scientific will be participating in the 1st INTERPHEX OSAKA Exhibition, which will be held over 3 days from February 4th (Wed) – 6th (Fri). Products which will be part of our booth include various enclosures, X-Ray CT scanner, humanoid robot, vacuum drying ovens, incubator, clean oven and laboratory chairs. 
We look forward to seeing you there. 
 

Event Information
Event	1st INTERPHEX OSAKA
Date/Time	February 4th (Wed) - February 6th (Fri) 10:00 - 18:00 (10:00 - 17:00 on February 6th)
Venue	INTEX Osaka
Yamato Scientific Co., Ltd. Exhibition Booth	Hall 4, No. 12-44
Official Website	http://www.interphex-osaka.jp/en/Home/
To register for a free invitation	Please contact our International Sales Dept.

 

At our booth

1. Nano Enclosure for Nano Particle Exposure Prevention NE1
An enclosure with nano powder containment performance evaluated based on the SMEPAC guidelines. With a design which incorporates superior material for electrical safety and easy cleaning, this product uses a bag-out HEPA as a standard feature

2. Powder Containment Weighing System ST1 
An enclosure which provides stability for semi-micro weighing of highly bioactive powders. Equipped with a waste recovery system and is fully prepared to protect against exposure during HEPA replacement.

3. 3D Measuring X-Ray CT Scanner (TDM Series)
Provides high spatial resolution and high contrast resolution for non-destructive internal observation. Non-destructive observation for granulated powders and tablet medicines can be carried out. A guide to our demonstration service with our industrial X-ray CT scanner will be provided.

4. Eco Incubator INE800
A low temperature incubator which reduces power consumption by approximately 44% by inverter control and also significantly cuts down frost formation on the condenser.

5. CO2 Incubator 
A HEPA filter maintains ISO Class 5 compliance in the inner 200L capacity chamber.

6. Vacuum Drying Oven DP Series
The amount of time taken to reach a set temperature has been significantly reduced. An oven series which can meet a wide range of vacuum drying needs. 

7. Compact Clean Oven 
A clean oven with a maximum operating temperature range of up to 300℃. With its compact outer dimensions of W500 x D766 x 840mm, 2 units can be used stacked on top of each other. .

8. Humanoid Robot
We will introduce a high-resolution time-sequence experimental system of a transcription process in humanoid robotics.

9. Laboratory Chairs
A sleek design suited for movements and posture needed in research work.