What’s New
2014-06-20 27th INTERPHEX JAPAN Exhibition
Yamato Scientific will be participating in the 27th INTERPHEX JAPAN Exhibition, which will be held at Tokyo Big Sight, from July 2nd (Wed) - July 4th (Fri). A variety of enclosures, bead mill, gas chromatograph analysis instrument, tabletop microscope, 3D measuring X-ray CT scanner, humanoid robot, vacuum drying oven and incubator will be among the equipment displayed, along with seminars at our booth.
We would like to invite you to this year's exhibition and look forward to seeing you at our booth.
Event Information | |
---|---|
Event | 27th INTERPHEX JAPAN |
Date/Time | July 2nd (Wed) - July 4th (Fri) 10:00 - 18:00 (10:00 - 17:00 on July 4th) |
Venue | Tokyo Big Sight, East Hall 1 |
Yamato Scientific Co., Ltd. Exhibition Booth | No. 19-16 |
Official Website | http://www.interphex.jp/en/ |
To register for a free invitation | Please contact our International Sales Dept. |
Our booth will include :
1. Nano Enclosure for Nano Particle Exposure Prevention NE1 (Displayed/Seminar)
An enclosure with nano powder containment performance evaluated based on the SMEPAC guidelines. With a design which incorporates superior material for electrical safety and easy cleaning, this product uses a bag-out HEPA as a standard feature.
2. Powder Containment Weighing System ST1 (Displayed)
An enclosure which provide stability for semi-micro weighing of highly bioactive powders. Equipped with a waste recovery system and is fully prepared to protect against exposure during HEPA replacement.
3. 3D Measuring X-Ray CT Scanner (TDM Series)
Provides high spatial resolution and high contrast resolution for non-destructive internal observation. Non-destructive observation for granulated powders and tablet medicines can be provided. A guide to our demonstration service with our industrial X-ray CT scanner will be provided.
4. Eco Incubator INE800 (Displayed)
A low temperature incubator which reduces power consumption by approximately 44% by inverter control and also significantly cuts down frost formation on the condenser.
5. Vacuum Drying Oven DP Series (Displayed)
The answer to all vacuum drying needs.
Booth Seminar Schedule (over 3 days):
Time | Seminar |
---|---|
1st Session: 10:30 to 10:40 |
Nano Enclosure for Nano Particle Exposure Prevention |
2nd Session: 13:00 to 13:10 |
|
1st Session: 10:45 to 10:55 |
3D Measuring X-Ray CT Scanner TDM Series |
2nd Session: 13:15 to 13:25 |
|
1st Session: 11:00 to 11:10 |
Hitachi Tabletop Microscope TM3030 |
2nd Session: 13:30 to 13:40 |
|
1st Session: 11:15 to 11:25 |
Gas Chromatograph 7820A Series |
2nd Session: 13:45 to 13:55 |
|
1st Session: 11:30 to 11:40 |
Support for Validation |
2nd Session: 14:00 to 14:10 |
|
14:15 to 14:25 | Bead Mill |
14:30 to 14:40 | Compact Microdosing Unit |
- For more information, please contact:
-
International Sales Department
Tel: 81-3-5548-7122 / Inquiry Form